THORSHEIM LT 18 SUBLT 12A - ZCP 10/4/2023Kodiak Island Borough Community
' Development Department
710 Mill Bay Rd. Rm 205
a Kodiak AK 99615
Ph. (907) 486 - 9363 Fax (907) 486 - 9396
Zoning Compliance Permit
Permit No.
The following information is to be supplied by the Applicant:
Property owner/ Applicant: McDonald's
Mailing Address: MRD, Inc. 8777 Toloff Dr Anchorage, AK 99507
Phone Number: 907-230-9733
Other contact email, etc.: michael.davidson@partners.mcd.com
Legal Description: '^
Subdv: 1 hor9t iie-U L a A t
Block: Lot: IQ
Street Address: 209 THORSHEIM AVE �L —om
Use & Size of Existing Structures:
Exterior walk in refrigerator box
Description of Proposed Action:
Remove existing box and replace with new box with self contained cooling unit.
Site Plan to include lot boundaries and existing easements, ecisting buildings, proposed location of nery construction, access points, and
vehicular parking areas, As Built required with all improvement changes.
Staff Compliance Review: Current zonng: 79(ZPROP_ID
Lot Area Lot Width: ,l Building Height 0 U
Front Yard: Rear Yard: ) Side Yard C ' 74-
Parking plan? [yt, l/ �, # Of Req'd Spaces: r1 As Built: 1 1 /
Staff Compliance Review Notes and Specific Plat! Subdivision Requirements`: V Ad —I
QO—WA VCegLlirP CO- bla i l h, �,r Ye�l�r�p n} 4 ogj� iylj i A, �
Subd Case No. Plat No. Building PernitNo.
Does the project involve
an EPA defined facility?
-commercialbuildings, install
institutions (schools, hospitill
with more than four (4)4Well
Driveway
Permit?
Septic Plan
Approval:
Fire
Marshall:
Proof of EPA notification provided (if required)?
*Required for all demolitions, for renovations disturbing at least UO square _ _ _ _ _
militarybases), feet,2601inearfeet. or35cubicfeetofRegulatedAsbestos Containing Material(RACM), andfor
nd residences renovations thatremoveaload -suppordngstmcturelmemberer.
umis
AoolicantCertification: Iherebycertffy that Iwillcomplywiththe provisions oftheKodiaklslandBorough Code andthat I
have the authoritytocertifythisastheproperfyowner, orasarepresentativeofthepropertyowner. I agree to haveidentifiable
cornermarkers in place for verification of building setback (yard) requirements.
Attachments?
9/28/2023
Date:
Dale:
List Other
Print Name: Michael R. Davidson
Signature:�.�
This permit is only for the proposed project as described by the applicant If there are any changes to the
proposed project, including its intended use, prior to or during itssiting, construction, operation, contact this
office immediately to determine if further reviewand approval of the revised project is necessary.
THIS FORM DOES NOT AUTHORIZE CONSTRUCTION WHEN A BUILDING PERMIT IS REQUIRED.
**EXPIRATION. Anyzoningcompliancepermitissuedissubjecttothesameexpiradon, suspension, andrevocadon provisionsasa
building permit issued for the sameconstruction permit **
COD Staff Certification
Date: h vo6.3 CDDStaff:
Payment Verification Zoning Compliance Permit Fee Payable in Cashier's Office Room It 104-Main floor of Borough Building
After -the -Fact 2X the published amount
Not App licable $0.00 WOO
Less than 1.75 acres: $30.00 $60.00
1.76 to 5.00 acres: I] $60.00
$120.00
5.01 to 40.00 acres: ❑ $90.00F1
$180.00
40.01 acresor more: ❑ $120.00
❑ $240.00
Transaction Receipt - Success
Kodiak Island Borough
Kodiak Island Borough Community Development
MID:200006988265
710 Mill Bay Road
Kodiak, AK 99615
907-486-9323
10/04/2023 09:44AM
Remittance ID:
Kodiak 10042313 3444891 Cur
Transaction ID:
311582314
MICHAEL DAVIDSON
8821 Saltana Drive
ANCHORAGE, Alaska 99516
United States
Visa - 2306
Approval Code: 02241 G
Sale
Amount: $30.00
McDonald's
907-230-9733
CZ2024-015
209 Thorsheim
Service Fee: $1.00
Service Fee Type: Dual Transaction
Total Amount: $31.00
Cardmember acknowledges
receipt of goods and/or
services in the amount of
the total shown hereon and
agrees to perform the
obligations set forth by the
cardmember's agreement with
the issuer.
Signature
click here to continue.
�SG
Refrigerated Solutions Group
Mgrilllsrfe-wr
727 2nd Street
Hudson, Wisconsin 54016
800-955-5253
715-386-2323
715-386-6149 FAX
Quotation
Quote No. NL2350800JK-A
Date : 06/05/2023
Page: 1 of 5
Customer
FRANKE FOODSERVICE SYSTEMS
22471
800 Aviation Pkwy
Smyrna, TN 37167-2581
Attention
Doug Pew
Project
#7148 Kodiak, AK
Item Number
Rep Name
Belkin Corporation -102N
Rep Number
102
Sales Specialist
Kim Carlson
(1) Nor -Lake FINELINE MCDonalds OUTDOOR Walk -In Cooler
15' 0" long, 10' 0" wide, 8' 7" high.
This full size walk-in contains 1,059 internal cubic feet to assure maximum storage capacity. Compare to
other quotes which may be nominal dimensions which can result in reduced storage space.
TOTAL WALK-IN PRICE
Net
32,064
(2) CPB075JC-E-4-EV Refrigeration systems
Refrigeration is "sized" for holding product only; that is; our calculation is based on product entering at the same temperature as
the desired temperature of this walk-in. If you feel that this is insufficient, please advise.
If Remote refrigeration condensing will be installed in ambient conditions colder than -10°F, RSG recommends an outdoor heater
kit added to the refrigeration system to run sufficiently in these outdoor ambient conditions. To add this system accessory your
upcharge will be $600. 'Standard outdoor Capsule Paks are rated to -20°F Ambient conditions. This accessory is not required.
TOTAL REFRIGERATION PRICE
$
7,962
(1) 75 Series - Optional Five Year Extended Compressor Warranty
$
198
(1)18 Month Labor/Service Warranty
$
0
(1) 75 Series - Optional Five Year Extended Compressor Warranty
$
198
(1) 18 Month Labor/Service Warranty
$
0
(1) Standard 15 year Walk-in Panel Warranty
$
0
(1) Standard 1 year Replacement Parts Warranty
$
0
TOTAL WARRANTY PRICE
$
397
FREIGHT
$
1,600
INSTALLATION
$
NIA
GRAND TOTAL QUOTATION PRICE
$
42,023
Notes / Clarifications:
Approximate Total Shipping Weight (Ibs) 3,866
RSG manufactures with environmentally friendly, CFC free, HFC 245fa polyurethane foam insulation.
Prices protected from increase for 60 days from date of quotation. Pricing is valid for 60 days upon receipt of purchase order
AND approved drawing. Order must ship per our current standard lead time or pricing will be subject to change. All shipments
will be FOB Hudson, WI or New Albany, MS. Based on the ship to address of this product, state sales tax maybe applicable.
If applicable, sales tax will be added to the RSG invoice.
Acceptance of an order based on this quotation is subject to credit approval.
Please reference this Quotation Number on all correspondence.
Street
Hudson, Wisconsin 54016
�MSG
800
800-95955-5253
715-386-2323
Refrigerated Solutions Group
715-386-6149 FAX
MBMtnsrEe,-sltr
Customer
FRANKE FOODSERVICE SYSTEMS
22471
800 Aviation Pkwy
Smyrna, TN 37167-2581
Attention
Doug Pew
Project
#7148 Kodiak, AK
Item Number
Rep Name
Belkin Corporation -102N
Rep Number
102
Approved by: Printed
Refrigerated Solutions Group
(1) Nor -Lake FINELINE MCDonalds OUTDOOR Walk -In Cooler
15' 0" long, 10' 0" wide, 8' 7" high.
Finishes:
040 Stucco Aluminum - Interiorwall, Interior ceiling
040 White Stucco Embossed Aluminum - Exterior wall
22 Gauge Stainless Steel - Interior door, Exterior door
26 Gauge Smooth Galvanized - Ceiling topside, Floor bottomside
.100 Smooth Aluminum - Interior floor
15' 0"
0
0
Signature
Quotation
Quote No. NL2350800JK-A
Date : 06/05/2023
Page: 2 of 5
MSG`
Refrigerated Solutions Group
727 2"d Street
Hudson, Wisconsin 54016
800-955-5253
715-386-2323
715-386-6149 FAX
Quotation
Quote No. NL2350800JK-A
Date : 06/05/2023
Page: 3 of 5
Customer
FRANKE FOODSERVICE SYSTEMS
22471
800 Aviation Pkwy
Smyrna, TN 37167-2581
Attention
Doug Pew
Project
#7148 Kodiak, AK
Item Number
Rep Name
Belkin Corporation -102N
Rep Number
102
Sales Specialist
Kim Carlson
Outdoor Walk -In includes Flat White Membrane Roof With Trim — 45 Lbs./Sq. Ft. Ceiling Load Capacity Minimum. .
(1) 36" X 78" Walk -In Door right-hand swing
Includes door closer, cam lift hinges (one spring loaded on 36" wide and smaller doors), NL9800 deadbolt key/padlock handle
with inside release, magnetic gasket, heater wire, double sweep gasket, LED vapor proof light, Heated Air Vent (standard on all
freezer compartments) and NL508 combination digital thermometer and switch w/pilot light.
(1) Clear Vu Model SS3678 Vinyl Curtain Door (71/2' Wall Minimum)
(1) Light Mounted Above Door (In Lieu Of Side)
(1) Kason 1901 Motion Detector Light Activator With Standard Door Electrical
(1) Door Rain Hood White Aluminum (Door Widths Up To And Including 42")
(1) McD Door 12" Relocation Panel Design (consisting of (2)12" panels)
(1) MCD Door Ajar Alarm Assembly
(1) Kason 0057 Security Latch
(1) Kason 1808NM (180034) Narrow Mount above Door
(1) Kason 1802 LED Safety Light 1 Watt
(3) Kason 1346 Adjustable Hinge - Chrome With Black Diamond Cover
(1) Kason 1094 SureClose Hydraulic Door Closer
(1) 36" Wide x 36" High Interior, Aluminum Diamond Tread Kickplate (Includes Extra Hinge)
(1) 36" Wide x 36" High Exterior, Aluminum Diamond Tread Kickplate (Includes Extra Hinge)
(1) McD Aluminum Diamond Tread Kickplate on Interior and Exterior Door Frame, Interior Ramp, RH
(1) McD 36" Wide Extruded Aluminum Threshold For Standard Interior Ramp
(1) McD Air Curtain Backing
(1) 36" Interior Ramp With Non -Skid Strips Applied To Top (24" Deep)
Sq. Ft. Of 1/2" COX Plywood Subfloor for Cooler (35.0"F)
Sq. Ft. Of Floor Plate, 3/16" Type 6061-T6 Aluminum Diamond Treadplate, Countersunk Holes, Screws, Sealant, And Stainless
Steel Cove Molding (3" High). Shipped Loose And Field Installed for Cooler (35.0"F)
(2) CPB075JC-E-4-EV 35" F Operation, Capsule -Pak Refrigeration System w/Med. size Opening, Outdoor Only Ceiling Mount
R-449A Refrigerant, 208/230-1-60 Electrical, 8.3 AWEF Rating, NEMA 6-15P Cord, 5.6 Total Amps With Integrated Enviro-
Control ( system capacity 5375 BTU's/hour at 100.0"F ambient temperature. )
Calculated load for Cooler (35.0"F) is 9798 BTU's/hour calculated from 100 °F ambient temperature, 0' elevation, 70 °F floor
temperature, 37.16 minutes open door time per 24 hrs for(1) 36.00" X 78.00" walk -indoor opening into 100.00 "F ambient, 1.5
Watts per square foot lighting operating 8 hours per day, 0.075 occupants working 8 hours per day. All calculations are based on
data supplied by ASHRAE publications.
(1) 75 Series - Optional Five Year Extended Compressor Warranty
(1) 18 Month Labor/Service Warranty
(1) 75 Series - Optional Five Year Extended Compressor Warranty
(1)18 Month Labor/Service Warranty
Refrigeration is "sized" for holding product only; that is; our calculation is based on product entering at the same temperature as
the desired temperature of this walk-in. If you feel that this is insufficient, please advise.
Street
Hudson, Wisconsin 54016
�MSG
800
800-95955-5253
715-386-2323
Refrigerated Solutions Group
715-386-6149 FAX
�sINp81F11-attr �
Customer
FRANKE FOODSERVICE SYSTEMS
22471
800 Aviation Pkwy
Smyrna, TN 37167-2581
Attention
Doug Pew
Project
#7148 Kodiak, AK
Item Number
Rep Name
Belkin Corporation -102N
Rep Number
102
Quotation
Quote No. NL2350800JK-A
Date: 06/05/2023
Page: 4 of 5
If Remote refrigeration condensing will be installed in ambient conditions colder than -10"F, RSG recommends an outdoor heater
kit added to the refrigeration system to run sufficiently in these outdoor ambient conditions. To add this system accessory your
upcharge will be $600. 'Standard outdoor Capsule Paks are rated to -20°F Ambient conditions. This accessory is not required.
Other Walk -In Accessories:
(3) 4" x 4" x 103" Angle Trim Strip White Embossed Aluminum
(1) Wind and Snow Load Certification With Tie Downs Included (121 To 600 Sq. Ft.)(Requires concrete pad to extend 6" beyond
the face of the walk-in)
(2) Export Crating 8 (ISPM 15 Compliant)
(1) McD Trim Package For Cooler Door Consisting Of (2)1 3/4" x 10 1/4" x 120" And (1)1 3/4" x 10 1/4" x 72" Embossed White
Aluminum Angle Trim Strips.
(3) McD Trim 1 3/4" x 5' x 96" Embossed White Aluminum Angle Trim Strip.
(1) Extra Tube of Adhesive and Silicone
(7) 96" Embossed White Aluminum Roof Trim (Field Cut As Required)
Construction Approvals: NSF Approved, cULus and CSA Electrical, UL Flame Spread-25 and ULC Flame Spread-50 in
accordance with ASTME-84. To comply with the US Energy Independence & Security Act of 2007, all walk-in doors opening into
the ambient (indoors or outdoors) are required to have a method for minimizing infiltration when the doors are open. All RSG
walk-in doors will include a spring hinge to comply with this standard by 1-1-09, however; to further minimize infiltration, RSG
recommends the use of a strip curtain or strip door for all exterior doors. NOTE: Indoor walk-in(s) must be in an environmentally
controlled space. Relative Humidity should be kept between 30%-60%, maintaining a Dew Point of 50" F or less.
Quotation is subject to change upon receipt of detailed specifications and/or refrigeration load information. Refrigeration sizing is
based on maximum line runs of 100 feet per system. NOTE: Walk -Ins sold into the state of California may require structural
engineered drawings for seismic review. If required, RSG can provide the required drawings and structural support. Please
contact RSG for lead time and pricing to meet this requirement. Local Codes: Walk -Ins may need engineered drawings or
special construction to meet local code approvals for rain, wind, seismic, and snow load approvals. If required, please contact
RSG for lead time and pricing to meet these requirements.
NOTE: Export Crating is included for transport from state of Washingon port to Alaska.
Snow Load Engineering Calculations are included.
(2) Capsule Pak refrigeration systems are required due to the size of the walk-in. Both systems will sit on top of the the walk-in
roof.
Due to the outdoor ambient temperatures exceeding the temperature of the 35" F. cooler, heate inside of the walk-in maybe
required and to be provided by others.
7272rid Street
Quotation
Hudson, Wisconsin 54016
800-955-5253
MSGTMt
Quote No. NL2350800JK-A
715-386-2323
Date : 06/05/2023
715-386-6149 FAX
Page: 5 of 5
Refrigerated Solutions Group
Customer FRANKE FOODSERVICE SYSTEMS
22471 800 Aviation Pkwy
Smyrna, TN 37167-2581
Project 47148 Kodiak, AK
TERMS OF SALE
1. NATURE OF DOCUMENT. This document constitutes the acceptance of the members of Refrigerated Solutions Group ("Seller") to sell the products specified on the reverse
side (the "Products") on the terms and conditions contained herein, however, acceptance is made expressly conditional on the Buyers agreement to all of the terms and
conditions contained herein. Seller's acceptance of a purchase order from the Buyer shall not constitute acceptance of any of the terms and conditions thereon which differ from
these terms, except as the Seller may otherwise specify in writing. Such different or conflicting terms are expressly rejected by Seller.
2. CHANGES AND CANCELLATION. Seller shall have the right to terminate, modify and/or cancel the contract for sale of the Products at any time Seller determines that Buyers
credit is not satisfactory or for any other reason in Sellers reasonable commercial judgment. Any such termination or cancellation shall be effective upon notification (orally or in
writing) to Buyer and shall be without liability to the Seller. Under no circumstances shall Buyer have the right to terminate the contract or cancel its order to purchase the
Products, without written authorization by the Seller. All cancelled orders and returned goods will be subject to a minimum of 25%cancellation and/or restocking charge. Custom
or modified units cannot be returned.
3. PRICES. Unless otherwise indicated, prices are F.O.B. Sellers facility, and do not include any sales, use, excise or similar taxes or duties now or hereafter imposed. Errors or
omissions in prices am subject to connection. Prices are subject to change without notice prior to shipment.
4. PAYMENT. Unless otherwise indicated, payment terms are net cash 30 days from date of shipment. In the event that the Buyer fails to make payment on time, Buyer shall be
liable to Seller for the lesser of (a) 1.5 % per month on the remaining balance or (b) the highest monthly interest rate which may lawfully be charged to Buyer. Buyer shall be liable
for all expenses (including reasonable attomeys' fees) incurred by Seller in collecting or attempting to collect any amounts due to Seller under the contract.
5. TITLE, RISK OF LOSS. Title to, and risk of loss of, the Products shall pass to Buyer upon the delivery of the Products F.O.B. Sellers facility to an agent of Buyer or to a
common carrier.
6. INSPECTION. If, upon receipt of the Products by Buyer at the destination, the same shall appear not to conform to the order, Buyer shall within seven (7) days after receipt
thereof, notify Seller of such condition and afford Seller a reasonable opportunity to inspect the Products and make the appropriate adjustments, repair or replacement. The
remedies afforded under Section 7 below shall be exclusive for any defects discovered in the Products and which could have been discovered upon inspection. lithe Seller is not
so notified, the Buyer waives any mcourse for those defects, and
all warranty obligations of Seller regarding such obvious defects or deficiencies shall terminate.
7. LIMITED WARRANTIES AND REMEDIES. Seller warrants that, at the time of shipment, the Products will be free from defects in material and workmanship to the original
purchaser -user for a period no longer than one year from original installation by an authorized representative or one year and three months from shipment, under conditions of
normal use and recommended maintenance. Written notice of a claim under this warranty must be received by Seller before the expiration of such period in order for warranty
coverage to apply.
If notice of a claim is timely made, Seller will repair or replace the Product or part which is defective (at Sellers sole option) either at the users facility or at Sellers plant, as Seller
shall decide. If Seller decides that a Product or part should be returned to its plant, the Buyer or user shall have the following obligations:
(a) removal of any parts to be returned;
(b) identification of all parts with tags staling the model number and serial number of the Products on which the part is used;
(c) shipment of Products and/or parts, transportation prepaid, to Sellers plant;
(d) installation of the repaired or replaced Product or parts at users facility.
This Warranty shall not apply to the extent that Products or parts have been used other than in conformance with operating or maintenance instructions, subjected to misuse or
abuse, damaged by accident, act of God, abnormal use or stress or any other matter unrelated to Seller and beyond its reasonable control or altered or modified by third parties.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PURPOSE. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR LOSS OF USE, REVENUE OR PROFIT OR FOR ANY OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGE, INCLUDING, BUT NOT LIMITED TO, FOOD SPOILAGE AND PRODUCT LOSS.
8. LIMITATION OF LIABILITY. The liability of Seller arising out of the manufacture, sale, delivery, repair, or use of any of the Products shall not, in any event, exceed the cost of
connecting defects or making replacement as required in the Limited Warranty and, upon the expiration of the Limited Warranty, all liability of Seller to Buyer and any end user
shall terminate.
9. DELAYS. Neither party shall be liable for any delay or failure to perform any obligation to the other if such delay or failure shall be caused by an event or contingency beyond its
reasonable control, irrespective of the nature thereof, however, the delaying party shall endeavor to correct such delay as soon as reasonably practicable.
10. MODIFICATION; ASSIGNMENT; APPLICABLE LAW; ENTIRE AGREEMENT. No modification of the terms and conditions specified in the contract shall be binding upon
Seller unless agreed to by Seller in writing. The contract shall not be assigned by Buyer, nor may any of the duties of Buyer or User thereunder be delegated, without the wri9en
consent of Seller. Any such assignment or delegation without such consent shall be void. The contract shall be governed by, and construed in accordance with, the laws of the
State of Delaware. The provisions of the contract shall constitute the entire agreement of the parties with respect to the sale of the Products by Seller to Buyer and shall
supersede all prior discussion and writings between the parties.
11. BINDING EFFECT OF CONTRACT. The contract shall be binding upon, and shall inure to the benefit of the parties hereto and their respective successom and assigns
12. RETURNS. No returns will be accepted without the prior approval of the Seller. A Return Authorization Number must be given by Seller prior to Products being shipped, freight
prepaid, by Buyer. Any damage in transit to Products being returned is Buyers responsibility. All accepted returns are subject to a 25 % restocking charge. Returns that have been
approved by Seller must be received within thirty (30) days after approval. Returns will not be considered after ninety (90) days from date of original notice.
13. FREIGHT DAMAGES. Claims for damages must be filed at once by purchaser with the freight carrier although as a service to our customers we may act as their agent in
seeking reimbursement under the applicable carrier insurance policy for the damage caused to the product in transit. Note: Any differences between the amount of the claim filed
and the money received is a valid receivable that is the responsibility of the customer to remit to Refrigerated Solutions Group.
14. INDEMNITY. Buyer or User agrees to indemnify, hold harmless and defend Seller from and against any and all liabilities and expenses arising out of any injury or damage
which results from Buyers or Users improper or abnormal use, misuse, misapplication, failure to inspect, maintain or repair the Products which am the subject of this agreement.
01114 Rev. B 151526
r
I